3500 Series Aviation Wheel Chocks.
With 24" Connecting Rope and Rubber Base.
Designed for general and commercial aviation.

TigerChocks 3500 Series Aviation Wheel Chocks are designed for business, commercial, cargo, and military aircraft. They are an updated version of the original wooden wheel chock design. These chocks are made from impact-absorbing urethane and are resistant to oils, chemicals, fuels, and hydraulic fluids used in the aviation industry. For additional safety and convenience, TigerChocks 3500 Series wheel chocks include a 1/2 in. x 24 in. (610 mm) replaceable nylon rope lanyard and our molded-in, high visibility color for easy identification. These lightweight wheel chocks are easy to use and ideal for carrying on aircraft.

TigerChocks 3500 Series Wheel Chocks are sold as singles or roped together in pairs. Also can be ordered with a rubber base.

Features
FOD free - will not rot or splinter.
Impact-absorbing urethane.
Resistant to fuels and lubricants.
Lightweight and easy to use.
High-load bearing capacity.
Custom color and logo available.
WARNING - WHEEL CHOCK USER GUIDELINES
Improper use may result in product failure.
Select wheel chock according to vehicle type and size.
Always use in pairs and on firm surfaces.
Chock in direction of grade.
Chock both sides of wheel if direction of grade is undetermined.
Use only after parking brake is applied and tested.
Center chocks snugly and squarely against tread of each wheel.
Always test chocks to insure they meet requirements.
Do not drive over wheel chocks.
OSHA SPECFIES
1910.178 (k) Trucks and railroad cars. (1) the brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.

Length: 21 inch
Width: 5 inch
Height: 3.25 inch
Lanyard: 24 inch