Lock one drive control of all skidloaders.
Works on enclosed cabs too!
The E-Series Lock, which locks one drive control lever, mounts permanently on the cage by "sandwiching” two plates on the cage. In the case of enclosed cabs, the locking plate is installed on the outside of the cab and the 3/16" thick mounting plate is put on the inside (this allows the glass to slide past it while operating the machine). A window must be open only while the lock is installed. The E-Series Lock is permanently attached with 4 non-reversing stainless steel screws. The "U-bar" captures one drive control lever and locks into the locking plate (which is secured on the cage) therefore securing the machine.
Randomly keyed.
Random key codes will not be kept on file. Multiple units ordered as randomly keyed will use different keys for each locking device. Locks ordered at a later date to match random key codes are VERY, VERY difficult to match. Locks can be sent to manufacturer and re-keyed for a fee.